免费吃瓜

The MBE Series is available with the following options to suit your applications:

• ATEX 2G compliance for hazardous area use, NEMA XP options available.
• Stainless Steel gear motor drive options
• High Alloy 904L, AL6XN wetted part options
• Alternative bearing and o'ring combinations
• Plug-in module available to simplify complete removal of equipment for COP (Clean-out-of Place) procedures and for easier maintenance

听 Reliable and easy to maintain听 EXTRA LARGE PLUG IN FLANGE The Plug In flange is also available with a large-diameter flange which allows the whole agitator head to be extracted from the vessel through the bottom opening. IMPELLER SPEED MONITORING Sometimes a problem inside the tank or an operating error can lead to forces on the agitator head that exceed the maximum transmissible torque, so that the magnetic coupling decouples. In this situation the agitator head stops turning although the drive is still running. To monitor this issue, we offer an optional contact-freerpm sensor for the agitator head. ATTACHMENT OF THE DRIVE SHELL BY TRICLAMP Attaching the drive with a TriClamp fitting enables it to be removed quickly without tools, eg: when using the agitator with an autoclavable tank. As another alternative, bayonet fittings are also possible. EXTRACTOR TOOL An optional tool for the removable containment shell (Plug In). The tool enables the containment shell to be removed from the tank easily and gently.听 听 MOUNTING OPTIONS Welded in Tank Plate - Tank plate welded to vessel by customer, Mixer bolts to plate, impeller sits on tank plate bearing postPlug in Tank Plate - Modified tank plate welded to vessel by customer, Mixer with coupling and bearing inserts into tank plate, Impeller sits on bearing 听