Products
- Analyzers
- Automation Systems
- Butter Equipment
- Centrifuges
- Cleaning-in-Place Systems
- Deareators
- Draught Regulators
- Evaporators
- Fat Crystalization Equipment
- Filters & Strainers
- Fluid Bed Dryers
- Heat Exchangers
- Homogenizers
- Membrane Filtration Systems
- Microparticulation Systems
- Mixers & Agitators
- Pasturization Systems
- Pigging Systems
- Plumbing Products
- Pumps
- Recreational Marine Products
- Spin Flash Dryers
- Spray Dryers
- UHT Systems
- Valves
- Adhesives & Sealants
- Automotive Heating System
- Baby Food
- Bakery Filing Cream
- Beer, Cider, Wine & Spirits
- Biodiesel
- Boats & Watercraft
- Building Infrastructure
- Butter & Spreads
- Cement
- Cheese
- Chocolate
- Coffee & Tea
- Condiments, Sauces & Soups
- Cosmetics
- Dairy Powders
- Ethanol
- Flavors & Fragrances
- Fruit Juice
- Fuel Supply System
- Hair, Nail & Skin Care Products
- Ice Cream
- Inorganic Chemicals
- Margarine & Shortening
- Meat & Animal-Based Proteins
- Milk & Cream
- Neutralization
- Nutraceuticals
- Oral Care
- Paints & Coatings
- Petrochemicals
- Pipelines
- Plant-Based Food & Beverages
- Plastic & Resins
- Refinery
- Soft Drinks
- Solvents & Solutions
- Specialty Chemicals
- Synthetic Rubber
- Yogurt

Universal 1 Series - 420/520 High Capacity - Positive Displacement Pumps
Positive Displacement Pumps designed to overcome the challenge of accurate pumping at high-volume capacities.
Product Specifications
MODEL | DISPLACEMENT PER REVOLUTION |
NOMINAL CAPACITY TO |
PRESSURE PSI |
---|---|---|---|
420-UHC | 1.62 Gal. (6.129 Liter) | 640 GPM (145.4 m³/hr.) | 200 PSI (13.8 bar) |
423-UHC | 1.62 Gal. (6.129 Liter) | 640 GPM (145.4 m³/hr.) | 200 PSI (13.8 bar) |
520-UHC | 2.38 Gal. (8.990 Liter) | 830 GPM (188.5 m³/hr.) | 150 PSI (10.3 bar) |
523-UHC | 2.38 Gal. (8.990 Liter) | 830 GPM (188.5 m³/hr.) | 150 PSI (10.3 bar) |
Body Standard:Ìý 316L Stainless Steel Options:
- Flush taps for future double seals
- Body retaining screws
Ports Standard:Ìý S-Line Options:
- Bevel Seat, I-Line, Q-Line; European DIN, SMS or RJT
- Male NPT, 150 lb. & 300 lb. Flanges. (150 lb. standard on Model 320)
- Rectangular Flange Inlet or Aseptic ports
- Extended ports
- Optional port sizes on 6, 18, 30 and 60 Models
Covers Standard:ÌýÌý316L SS plain cover, hex cover nuts Options:
- Vent or drain connections
- Aseptic, jacketed or vented
Rotors Standard:ÌýÌýAlloy 88 Twin Wing. Standard clearance for up toÌý180° F (82° C) Options:
- Hot clearance to 300° F (149° C)
- Clearance above 300° F (149° C) on application
- Special & front face clearances and slotted rotor hub for special applications
O-Rings Standard:ÌýBuna-N Options:
- Fluoroelastomer (FKM)
- EPDM
- Silicone
- EPDM-SF
Seals Standard:ÌýSingle Mechanical Options:
- Double Mechanical
- Seal faces:Ìý Ceramic, Silicon Carbide, Tungsten Carbide, Carbon, John Crane Type 8B2 Carbon,Ìý Seal Faces
Gearcase Standard: Painted cast iron WCB blue, 316L SS shafts, top shaftÌýposition,Ìý17-4 PH shafts Options:
- Steel-It paint
- Lower shaft position
- Pedestal shims for side mounted pumps. Left hand shaft position standard
- Right hand shaft position on side mounted gearcase
Bases Standard:ÌýFlat plate, epoxy painted, with adjustable feet, SS couplingÌýguard, and Lovejoy or Woods coupling Options:
- Carbon steel channel
Drives Standard:ÌýNord/Baldor Inline Option:
- Right angle gear reducer
Click on the links below to download pump model performance curves for Universal High Capacity (UHC) Series Positive Displacement pumps.
Ìý
-
Universal High Capacity Series - Model 420/423 - Performance Curve - 95-07086 || PDF
-
Universal High Capacity Series - Model 520/523 - Performance Curve - 95-07087 || PDF
Ìý